season start
After recovering from the technical KO, it’s time to ride. Well, some assembly is required first. This picture was taken _after_ the throttle bodies, the airbox, air ducts, battery tray and the fairing front piece were mounted.

Getting there. I removed the aftermarket airfilter, which was the type that goes on top of the air funnels. This means that there is dirty air in the air box, and it has access to the breather in the crankcase. Luckily the cranckcase breather has a reed valve in it, if I remember correctly. The original air filters will do the job now.
Note to self: when assembling bike together, make sure all electrical connections are connected. The bike will not start, if the throttle body connector is not connected.

The first 30 km’s done. If weather permits, more will be done tomorrow.
She needs to be cleaned. I also need to bleed the brakes, both front and rear. The front is a bit mushy and I think the rear is suffering from the same as last summer, the brake was nonexistent. I think that the fact that the reservoir and M/C are so close to the engine, that it heats the fluid and builds air in the system (?). After bleeding it, it was great.

Memories from last year.

