Clutch seals etc.
The spider spring on my slipper clutch died, so off came the clutch. While there, I noticed a possible leak in the big axle seals.. they might need to be replaced. I also replaced the 2 small o-rings on the clutch rod.
After some googling around, the seals are as follow:
the big one:
46340477A [ 463.4.047.7A ] (old number)
93040341A [ 930.4.034.1A ] (new number)
size 75x95x12 in mm.
The small one:
46340269A [ 463.4.026.9A ] (old number)
93040351A [ 930.4.035.1A ] (new number)
size 35x47x7 in mm.
(before buying or anything, double check, these are only FYI!!)
I am planning to take the bike for valve adjustment again to the local authorised dealer. that’s where they were checked the last time and also replacement rockers were installed. The Tech at the dealer is very friendly, talks candidly about Ducati’s and knows them inside out. Highly recommendable. (even though nothing beats doing everything by yourself and saving a lot of money.. or, on the other hand - doing a lot of damage and ending up costing way more than what it would have originally cost.)
This does not yet look like it needs replacing?
